Msx-20w-pa Dwyer Instruments Pressure Sensors Msx Pro Pressure Transmitter
Monitors Differential Pressure, Air Velocity and Volumetric Flow
The Series MSX Magnesense® Differential Pressure Transmitter combines the stability and versatility of the original Series MS2 Magnesense® II transmitter for use in building control applications. The MSX simplifies the ordering process to deliver the desired configuration, which reduces product setup time. Pressure ranges are available in Pa, mm w.c., and in w.c. All pressure ranges can be configured in unidirectional or bidirectional modes, providing a total of 32 ranges. The MSX transmitter can provide a linear pressure output or a linear velocity output with the square root extraction from the transmitter. Additional parameters have been included to expand the square root capability for calculating flow. Dual voltage and milliamp output signals can be used to provide both control and equipment output signal verification.
Product name | Pressure Trasmitter |
Service | Air and non-combustible, compatible gases |
Accuracy | ±1% FSO |
Power Requirements | 10-36 VDC (2-wire), 17-36 VDC or isolated 21.6-33 VAC (3-wire) |
Output Signals | 4-20 mA (2-wire); 0-10 V or 0-5 V selectable (3-wire). |
Electrical Entry | 1/2" NPS thread |
Display | 4 digit LCD. |
Mounting Orientation | Pressure sensor measurement unaffected by orientation |
Pressure Limits:Ranges 0 and 1: 3.6 psi max operation, 6 psi burst; Ranges 2 and 3: 6 psi max operation, 6 psi burst.
Loop Resistance:Current output: 0-1250 Ω max; Voltage output: min. load resistance 1 k Ω.