Electro-Pneumatic Positioner with valve position feedback This series is for positioning of p and low cost control valve

Same series as EP800 but this works having pneumatic signal (20 to 100Kpa). Also double acting and single acting types are available.

FEATURES

OUSABLE WITH LOW TO HIGH CAPACITY ACTUATORS

Byadjusting the built-in capacity control spring, the positioner can be made optimum to the given actuator DA LOW AIR CONSUMPTION
The pilot valve is low in air consumption and high in capacity.

DOUTPUT CHARACTERISTICS SELECTABLE

Having a cam within the feedback construction, choices other than the standard linear characteristic are available

OCOMPATIBLE WITH

VARIOUS FEEDBACK TYPES
Applicable to the following types by simply exchanging the cam block.
* For Linear type actuator:Feedback for Standard lever type****..*..EPO8DI
* For Rotary type actuator: Feedback for lever type.. EPO8O2
* For Rotary type actuator: Feedback for direct connection to driving shaftEPO8口4 DREVERSE ACTION PILOT VALVE EASILY AVAILABLE

The positioner for double acting actuators can be used as a reverse action pilot valve when combined with a spring returm actuator that requires a reverse action pilot

OANTI-PRESSURE AND EXPLOSION PROOF STRUCTURE MARKING ON-SITE ADJUSTMENT POSSIBLE

The anti-pressure and explosion proof construction, with the terminal and coil blocks enclosed together in one package. makes it possible to remove the positioner cover for inside inspection or span adjustment even in an explosive ambient.

DINTRINSICALLY SAFE CONSTRUCTION FOR A WIDE SCOPE OF APPLICATIONS

The intrinsically safe construction(torque-coil type:EP82) cover terminals and coil as one package. This, combined with The adoption of the specified zener barrier, makes the unit applicable in all hazardous gas location( including Class 0 area) ranging from low(-40℃)to high(+60℃) temperature environment.