2.6ton Mini Excavator Small Excavation Equipment Micro Digger For Construction Work

1. Inspection should be carried out before operation to confirm that there are no obstacles and other personnel within the moving range of the boom and bucket, and the operation can be started only after sounding the alarm.

2. When digging grooves, the slopes and soil should be placed according to the requirements of safety technical disclosure, and it is strictly forbidden to dig under the fuselage.

3. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car.

4. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground.

Specifications:

Notices:
1. Inspection should be carried out before operation to confirm that there are no obstacles and other personnel within the moving range of the boom and bucket, and the operation can be started only after sounding the alarm.

2. When digging grooves, the slopes and soil should be placed according to the requirements of safety technical disclosure, and it is strictly forbidden to dig under the fuselage.

3. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car.

4. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground.

5. Before the operator can leave the cab, the bucket must be dropped and the engine turned off.

6. Do not lift materials with buckets.

7. When the abnormal operation is found, it should be stopped immediately, and the operation can be continued after troubleshooting.

8. When the tire excavator is moving on a slope, the bucket should be turned to the side of the high slope.

9. When using an excavator to demolish a structure, the operator should analyze the collapse direction of the structure, and leave a space for the structure to collapse between the excavator cab and the demolished structure.

10. The excavator parking site should be flat and solid, and the traveling mechanism must be braked when stopping.

Applications:
The main uses of the excavator: in road construction projects to excavate trenches, in construction projects to excavate the foundation, in water conservancy projects to excavate ditches, canals and dredging rivers, in quarries, open-pit mining and other projects for the stripping and excavation of ore, etc.; in addition to gravel, coal and other loose materials can be loaded.

Operation: After replacing the working device, it can also be used for lifting, pouring, installation, piling, ramming and pile pulling.

FAQ
Q1: Are you an original manufacturer?
We are a professional manufacturer, we have our own R&D team and sales team, and we provide a one-stop service.

Q2: What about the warranty time?
1 year or 2000 hours. We shoulder all costs during the warranty period, including the freight. And we also provide after-sales service support and agricultural technical support

Q3: What engine you can offer?
Optional Yanmar, Kubota, Brrigs&Sttraton engine,
Optional US EPA & Euro stage V engine

Q4: How can we ensure quality?
We have a quality control system and also double check supervise team,
The final inspection is always carried out before the shipment

Q5: What is your production time or delivery time?
Usually, we make merchandise inventory, if we have the products in stock, the delivery time is 5-10 days after receiving the deposit. If we don't have the products in stock, we will arrange the production right now, the delivery time will be 30-45 days, It depends on the order quantity.

Q6: What is your payment term?
Normally we can work on T/T and support 30% payment in advance and the other balance 70% can be paid against COPY B/L.

Q7: Do you support Customized service?
Yes, offer me the necessary information, we provide custom-made service to meet the different needs of global clients with different budgets.

Q8: Do you offer accessories?
Yes, we have many kinds of accessories for your choice and make the mini excavator in wide usage and more effective.

Q9: How do you pack the machine if buy one unit?
Usually, we pack the whole machine with a strong wooden crate.

Q10: What is your MOQ?
We support the small orders and our MOQ is 1 unit
Secondly, during the guarantee period, we will send new lights with new orders for small quantities. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to the real situation.

Company Brief Introduction:

Mini Excavator, Full Energy, You will become a Big Winner!

Our main hot products include Excavators, Mini Excavators, Electric Excavators, Electric Forklifts, Road Rollers, scissors elevators, forklifts, and electric forklifts together with other machinery fields. Through these products, our Mini Excavators sell pretty hotly! Like 0.8T, 1.0T, 1.2T, 1.6T, 1.7T, 1.8T, 2.0T, 3.0T, 4T, 5T, 6T, 10T, 20T, 30T Excavators really win customers’ good likes!

And Also Scissor elevator, like 6 meters, 10 meters, 12 meters really hot as well.

All Products have obtained ISO9001, CE, SGS, EPA, and TUV Certificated.