Chinese Cheap Micro Digger Machine New Mini Excavator Bucket Hydraulic

1. Mini excavator is smaller than a traditional excavator, What’s more, important that is also reduced in terms of fuel consumption, so the improvement of energy saving is the optimization of environmental protection projects.
2. High usage rate, a wide range of use environment, and high efficiency are also the advantages of small excavators, in the construction team, efficiency and quality are undoubtedly in the first place.
3. Noise pollution is also a source of pollution. Small excavators also do a good job of reducing noise, which is conducive to promoting the safety and efficiency of workers.

Specifications:

Notices:
1. Inspection should be carried out before operation to confirm that there are no obstacles and other personnel within the moving range of the boom and bucket, and the operation can be started only after sounding the alarm.
2. When digging grooves, the slopes and soil should be placed according to the requirements of safety technical disclosure, and it is strictly forbidden to dig under the fuselage.
3. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car.
4. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground.
5. Before the operator can leave the cab, the bucket must be dropped and the engine turned off.
6. Do not lift materials with buckets.
7. When the abnormal operation is found, it should be stopped immediately, and the operation can be continued after troubleshooting.
8. When the tire excavator is moving on a slope, the bucket should be turned to the side of the high slope.
9. When using an excavator to demolish a structure, the operator should analyze the collapse direction of the structure, and leave a space for the structure to collapse between the excavator cab and the demolished structure.
10. The excavator parking site should be flat and solid, and the traveling mechanism must be braked when stopping.

Applications:
The main uses of the excavator: in road construction projects to excavate trenches, in construction projects to excavate the foundation, in water conservancy projects to excavate ditches, canals, and dredging rivers, in quarries, open-pit mining, and other projects for the stripping and excavation of ore, etc.; in addition to gravel, coal and other loose materials can be loaded.
Operation: After replacing the working device, it can also be used for lifting, pouring, installation, piling, ramming, and pile pulling.




Company Brief Introduction:
Mini Excavator, Full Energy, You will become a Big Winner!

Our main hot products include Excavators, Mini Excavators, Electric Excavators, Electric Forklifts, Road Rollers, Scissor elevator, forklift and electric forklift together with other machinery fields. Through these products, our Mini Excavators sell pretty hot! Like 0.8T, 1.0T, 1.2T, 1.6T, 1.7T, 1.8T, 2.0T, 3.0T, 4T, 5T, 6T, 10T, 20T, 30T Excavators really win customer’s good likes!
And Also Scissor elevator, like 6 meter, 10 meter, 12 meter really hot as well.
All Products have obtained ISO9001, CE, SGS, EPA and TUV Certificated.