Remarks:

1. The amount of atomization is related to power supply voltage, power supply current, working water temperature, water quality, water level and air flow. The above fog is based on the test data obtained under the standard test environment of our factory.

2. Water level refers to the vertical distance from the shell surface to the water surface.

3. The working current of atomizer increases slightly with the increase of working voltage and decreases slightly with the increase of temperature.

4. Water quality will affect the identification ability of water shortage protection switch. Clean tap water is recommended.

5. Usually the conductivity of clean tap water is 120-250 US/CM, and that of pure water is 5-15US/CM. The specific conductivity is determined by the local water quality.

Product Maintenance and Maintenance:

In order to achieve the longest service life and the best use effect of your product, please read the following carefully.

_Scale will deposit on the surface of the shell and nebulizer sheet of the nebulizer after long working time, which seriously affects its service life and nebulizer quantity. Therefore, it is recommended that the nebulizer be cleaned at least once every half month. When cleaning, use a soft cloth dipped in alcohol to gently scrub the surface of the atomizer shell and the atomizer sheet. Do not clean the atomizer sheet with a hard object to avoid scratching the atomizer sheet.

_Water quality will affect the service life of atomizer. Clean water is recommended.

_When the atomizer works for a long time (about 3000 hours), the service life of the atomizer will decrease and the amount of atomization will decrease. At this time, you can replace the new atomizer. Please contact the local distributor or the company to buy the atomizer and the matching tool keys.