Industrial ultrasonic cleaner with filter system for auto Motorcycle parts engine Carburetor Washer

Circulating filter type ultrasonic cleaner

The ultrasonic cleaning machine uses the super audio signal higher than 20kHz, which is converted into high-frequency mechanical vibration by the transducer, and then it is introduced into the cleaning liquid. The ultrasonic wave is dense in the cleaning liquid and radiates forward, which makes the liquid flow and produces tens of thousands of tiny bubbles. These bubbles are formed and grown by the negative pressure formed by the longitudinal propagation of the super sonic wave, and quickly close (extinguish) in the positive and negative pressure area. The formation, growth and rapid closure of these micro bubbles are called cavitation phenomena. In the cavitation phenomenon, these bubbles form a transient high pressure of more than 1000 atmospheric pressure when they are closed. With the continuous instantaneous high pressure, like a series of small explosions, they bombard the surface of the object, making the grease and dirt on the surface and in the gap be peeled off rapidly, achieving the rapid cleaning effect.

The equipment consists of the following parts:
The machine is composed of three functional cleaning tanks + one drain tank + one hot dry tank. The cleaning tank is equipped with bottom vibration side vibration ultrasonic system and is operated manually. In the ultrasonic solvent tank, the strong penetration force of ultrasonic wave is used to impact the surface of the workpiece and combine with the oil removal and decontamination ability of the solvent, so that the oil stains tightly attached to the surface of the workpiece will fall off quickly, so as to achieve the purpose of cleaning.

The ultrasonic power is not equal to the power consumption, and the power consumption is about 1 / 2W of the ultrasonic power.

Industrial ultrasonic cleaner with filter system for auto Motorcycle parts engine Carburetor Washer