Digital Rcd(Elcb) Tester GT5206A

This instrument is controlled by an intelligent microcontroller chip, with high precision, high reliability and high stability; AUTO RAMP function enables simultaneously testing action time and action current of fault; according to LCD icon prompts, there is an instruction to check whether the wiring is correct; after test is completed, the measurement results are automatically displayed; there are 0 ° and 180 ° phase options, which can detect quickest trigger time; "OL" is displayed for over range; the instrument is equipped with FUSE safety protection and CAT III 300V safety level.

• Features of Digital Rcd(Elcb) Tester

• Digital Rcd(Elcb) Tester possesses the following features:

  1.This instrument is only suitable for single-phase 230V /

  50Hz (with power supply voltage range

  2.Wiring check: whether three LED indicators are correct,

  if two green indicators P-E and P-N are on, and red
  indicator is not on, then it is correct: the test can only

  be triggered if the wiring is correct.

  3.Phase angle selection: you can choose to start the test

  from positive (0 °) or from half cycle negative (180 °);

  4.“OL" is displayed for over range: when the test trip action

  time exceeds the maximum test time, the LCD will display "OL mS"

  5.Automatic data holding: After test is completed, the displayed

  measurement results are held for a certain period of time;

  6.AUTO RAMP test: The AUTO RAMP test can test tripping

  current and time simultaneously.

  7.Shutdown alarm function: After 3 minutes of operation, the

  instrument will let out a shutdown beep alarm;

  8.Built-in FUSE security protection;

  9.Power supply: directly supplied by circuit under test (power
  supply 230V / 50Hz);
• Specification of Digital Rcd(Elcb) Tester

• • Technical parameters	Technical index
    display	Large-screen LCD (up to 500 counts).
    Over limit indication:	Hi: The mark appears on insulation resistance range.
    Auto range:	Higher range: 500 counts Lower range: 1 count (only on insulation resistance range)
    Sampling Rate:	2 times / second.
    Allowed altitude:	≤2000m (for indoor use)
    Operation environment:	Temperature: 0℃-40 ℃ / Humidity: ≤85%
    Operation environment:	Temperature: -20 ℃ -60 ℃ / Humidity: ≤90%
    Overload protection:	Insulation resistance range: AC 1200V / 10 seconds Voltage range: AC 720V / 10 seconds
    Withstand voltage:	AC 6000V (50 / 60Hz) / 5 seconds (between circuit and periphery
    Insulation resistance:	≥1000MΩ/ DC 1000V (between circuit and periphery)
    power supply	DC9V (6x1.5V AA batteries)
    Current consumption:	Approximately 1.5A (maximum) (normally maintained at approximately 50mA)
    Battery Life:	About 12 hours
    Dimension:	176x110x77mm

  

  FAQ

  1. What is our company MOQ?

  As for now it is flexible, but it affects prices.

  2. What's the best payment term?

  Such as Western Union,T/T, L/C,Paypal, Bank Transfer, Money Gram, etc.

  3.What's our company sample policy?

  We will send you some samples with pleasure,but you need to pay for it.

  4. What is our shipment and delivery term?

  Shipment: Professional DHL/Fedex/TNT/UPS and other special line.

  Delivery term:Within 4-7 days after payment by (DHL/TNT/UPS/EMS/Fedex)

Auto- discharge function to make, the operation safe.LCD Back-light.Digital readout display.Live circuit warning symbols with audio sounds.Auto- power off function (in 10 minutes without operation)Timer measurement function.Low battery indicationSuitable for 12V DC adapter (12V/1A)