Product Description:
Ultra-high power: the maximum power can reach 1000W.
High efficiency and energy saving: the whole lighting efficiency>110lm/w.
Structural design: adopts integrated die-casting process, large heat dissipation area and good thermal conductivity.
Adjusting bracket: adjustable 180° lighting installation.
Optical design: Provide a variety of light distribution schemes to meet the lighting needs in different environments.
Heat dissipation design: Each module is independent of each other, which can effectively prevent excessive heat concentration; the separate design of the driver and the light source cavity effectively reduces the temperature of the LED and the driver.
Easy to maintain: The drive is external and can be disassembled for easy maintenance and replacement.
Green and environmental protection: no harmful elements such as mercury and lead.
LED Chip
SMD3030 or SMD5050, high luminous efficiency: up to 200lm
Lifespan>50,000 hours
Heat sink
Aluminum material is with fin type design for better heat dissipation
PC lens optional
Symmetrical PC lens: 30 ˚ /60 ˚ /90 ˚
Inclination angle
±180° adjusted angle available for outdoor & indoor lighting applications
Power Supply
Meanwell, Moso, Sosen driver are optinal , with 5 years warranty
Waterproof connectors
Adopt the IP67 connector with power connection, and realize plug and work
±180˚Angle adjustable
Each module adjusted ±180° positive and negative.
The whole lamp can be adjusted 360°,and we mounted anti-skid teeth on the bracket.
Power wire
The power wire implement Europe standards, brown is L, blue is N, and yellow-green is ground.
HIGH MAST LED FLOOD LIGHT INSTALLATION:
Application
Good to use in Airport/Stadium/Highways/Rail/Logistics/Golf course.
QC
GYLED has very strict Quality Control System, from checking and evaluation of incoming materials to the delivery of products, each item will be checked and tested for several times.
MOQ: 1 CARTON
Maintenance:
1, Cut off power.
2, Remove male and female connectors or power supply wires that need to be replaced, remove the screws.
3, Replacing with new components.
4, Re-tighten Replacement, connect the male and female connectors and wires of power supply.
5, Lock up the screws.
6, Repairs completed.