Card dimensions:

ID CARD:

Length:85.47～85.90 mm

Width: 53.92～54.18 mm

Thickness: 0.95~1.08 mm

1. Can be customized to support magnetic card (read only), IC card/contactless card read & write

2. 0.76mm standard card thickness can be customized

voltage:24V +/-10%

current:

Idle current ＜1A

Peak current ＜10A

Operation current ＜2A

Current surge: ＜40A

Idle power consumption:＜24W

Working power consumption:＜48 W

1. Disk volume:QJ05:500pcs/QJ10:1000pcs

2. Card dispensing cassette capacity:150pcs(1.0mm thickness)

3. The cards pre-empty detection:10±3(1.0mm thickness)

4. Error card bin capacity (signal bin with lock):30±3(1.0mm thickness)

1. different volume of card cassette not exceed 300 pcs of cards can be customized (thickness standard of ID card)

QJ05 mode:

Load cards≦13sec(The card is sent from the card cassette to rotor disk, include reading the information of ID card)

Feed cards≦11 sec(the card is sent from rotor disk to the output end,include reading the information of ID card)

Capture the cards≦7 sec(From output entrance to capturing device,include reading the information of ID card)

Retrieve the cards to disk≦13 sec(From the disk to capturing device,include reading the information of ID card)

QJ10 mode:

Load cards≦14 sec(The card is sent from the card cassette to rotor disk, include reading the information of ID card)

Feed cards≦13 sec(the card is sent from rotor disk to the output end,include reading the information of ID card)

Capture the cards≦8 sec(From output entrance to capturing device,include reading the information of ID card)

Retrieve the cards to disk≦14 sec(From the disk to capturing device,include reading the information of ID card)

ID card reading timing: around 2.5 sec

The above time is only for ID card standard model

Error rate:≦1/1000

life:300000 times of card transportation (not include wearing parts)

note:load a card-feed a card is once

main parts life:

ID card reader:1000000 times

Card in and out cam:50000 times

Transporting belt:300000 times

Motor:300000 times

MTBF: ≧30,000 hours (Electronic parts only)

Operation temperature and humidity :5～50 ℃, 20% ~ 80%RH(non condensing)

Storage temperature and humidity:-20～70 ℃, 20% ~ 80%RH(non condensing)