FDA CE Approved masques FFP3 mask respirator disposable kn95 protective mask
- Adjustable nose clips & latex-free rubber head straps
- Exhalation valve reduce hot air buildup
- Individually packaging by plastic bag, 10 or 20pcs/box, 12boxes/ctn
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish | Filter Efficiency | Penetration | Resistant |
FFP1 NR | ≧80% | < 20% | < 21mmH2O |
FFP2 NR | ≧94% | < 5% | < 24mmH2O |
FFP3 NR | ≧99% | < 1% | < 30mmH2O |
3. Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its required for use.
- Use the respirator in accordance with applicable health and safety regulations.
- Fit the respirator and check leak-tightness before entering the contaminated area.
- Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s
- skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.

