PLC Control Non Woven Face Mask Making Machine/Medical Mask Making Machine

Features:

1, Stability, performance, low failure rate.
2, Stainless steel construction, separate collection of electrical control box and finished table, machine real close, off a small plot.
3, All parts chrome plated surface, covering parts of stainless steel, beautiful and clean.

Performance Characteristic

We adopt the international advanced technology for this machine , the AL Bar transported by feed cam , the length of the AL Bar can be adjust freely . It also can be added double AL Bars if necessary . And the machine is low power consumption and much lighter .

It is an automatic machine to produce the finished face mask ,and to weld face mask by ultrasonic .From material feeding for produce face mask blank to welding the ear-loop, this machine integrate 1 set face mask bank machine with 2 sets inside ear-loop machine by the mask distribution system ,so that improved its automation. Only 2 person are needed to operate.

As we all know, flat mask consists of mask blank and ear loop. The traditional flat mask machine uses a mask blank machine to produce mask blank, and then uses a inner/outer ear loop machine to weld the ear loop. For achieving a perfect match of the output between mask blank making machine and ear loop welding machine, we need to combine a mask blank making machine with one inner/outer ear loop welding machines so as to maximize the effectiveness of production line.

Technical parameters

1. Three layers of fabric are automatically aligned and feed, and welding system use ultrasonic waves are continuously pressed.
2. The production line adopts the structure of 2ply, with high production efficiency
3. Nose clips and ear loop are automatically cut and welded by ultrasound
4. Automatic counting and palletizing after welding earbands