Ffp3 Disposable Respirator Mask Chemical Repellent Custom Logo Nosepiece Adjustable

Chemical Repellent FFP3 Face Mask , Disposable Dust Masks Convenient With Valve

Marking design

• Your company Logo

• Item Code

• EN149: 2001 + A1: 2009 - reference standard

• FFPx NR - level of protection

• CE 0086 - conformity marking and notified body number

How to use?

• Hold the filtering facepiece in the palm of your hand allowing the headbands to hang freely on the back of the hand.

• Position the filtering facepiece on the face covering the nose and the mouth and making certain that the metal strip nosepiece is on the upper part.

• Pass the lower headband over your head and position it on the neck. Pass the upper headband over your head and position it on your head and above your ears.

• Adjust the nosepiece to fit your nose. Regulate the tension of the headbands(in those models where this is possible).

• Check that the mask hugs your face closely.

Introduction

MX-5006 FFP3V vertical fold flat mask has 4-plys, PP spunbond outer layer,actived carbon fiber filtration middle layer,PP meltbrown high filteration layer, PP spunbond inner layer.(99% filter efficiency)

Expiry date and Packing

The package of this foldable mask with valve is 10pcs/box , 12box/carton and the size of the carton is 42*32*28cm

If maintained as per storage instructions, product can be used up to 5 years from date of manufactory.

.

Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.EU type examination certificate (module B) issued by BSI , notified body n°0086.

• The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086​

Discard and replace the mask if:

• The mask is removed whilst in the contaminated area.

• Clogging of the respirator causes breathing difficulties.

• The mask becomes damaged.

• For respirators protecting against vapours,the smell of vapours present becomes derectable.

More pictures