OLED fingertip Pluse oximeter with CE and FDA approved by Factory

Features:

• Oxygen saturation in hemoglobin measurement - SpO2 (%)
• Pulse rate measurement in beats per minute (bpm)
• Standalone data recording
• OLED display
• 6 model,4 directions
• soft silicone padding,soft clip
• Parameters:SPO2,PR,PI
• Spo2 waveform,PR.pluse bar and PI
• USB interface to Computer
• Software to analyze, display and print your data
• Four Orientation LED numeric six way display for easy reading
• Audible pulse sound and waveform graphical display or bar graph options

Instructions
M130 Pulse Oximeter is a non-invasive device intended for the spot-check of oxygen saturation of arterial hemoglobin (SpO2) and the pulse rate of adult and pediatric patients in home and hospital environments (including clinical use in internist/surgery, anesthesia, intensive care ect.). This device is not intended for continuous monitoring.

• Performance	CMS50DL1	CMS50DL2	CMS50D1	CMS50D2
  Display Mode	LED display		0.96" Dual-color OLED display (blue and yellow)
  Power Supply	1.5V (AAA size) alkaline batteries * 2
  Power Consumption	less than 25mA		less than 30mA	less than 80 mA
  Dimension	61(L) mm * 36(W) mm * 32(H) mm	60(L) * 30.5(W) * 32.5 (H) mm	61(L) * 36(W) * 32(H) mm	60(L) * 30.5(W) * 32.5 (H) mm
  Weight	About 60g (with the batteries)	About 50g (with the batteries))	About 60g (with the batteries)	About 50g (with the batteries)

• Adjustable display brightness
• Alarms with high and low limits
• One button operation
• Automatically turns off when not in use
• AAA battery powered
• Expected battery life in excess of 30 hours of use
• Low battery alarm
• 1 Year Warranty
• 
• 
•