Portable Device or sensors to reading parameters DO TDS temp Salanity EC Ammonia for fish tanks
Dissolved oxygen meters are electronic devices that measure the output from the dissolved oxygen sensor and display the result in an easy-to-read format. The cost of a dissolved oxygen meter varies depending on its features and capabilities.
Product Description

The handheld device can be used for monitoring of dissolved oxygen, temperature and PH in water, and can meet the requirements of portable accurate water quality measurement.
Signal output: RS-485
The screen uses a custom backlight, which can display dissolved oxygen, temperature, PH, and a real-time clock.
Manual calibration of salinity, air pressure and KB value to ensure accurate measurement value.
Features
* 0-20mg/L or 0-200% saturation
* 0~50 °C; IP68 protection level
* No film, no electrolyte, no polarization
* No need to consume oxygen, no flow rate
* Built-in temperature sensor, automatic temperature compensation
* Free from chemical interferences such as sulfides
* Small annual drift, fast response, and more accurate measurement
* Free of maintenance, longer application cycle and lower cost of use
* Fluor cap replacement is simple
*Support RS-485, MODBUS protocol
Model | Fluorescent dissolved oxygen sensor |
Measuring Range | 0-20mg/L or 0 ≤ 200% saturation |
Response time | 3min |
Precision | ± 1% |
Sensor drift | <1% per year |
Temperature range | 0~50℃ |
Temperature precision | ± 0.5℃ |
Calibration method | One or Two-point calibration |
output method | RS-485 (Modbus/ RTU ) |
Temperature sensor | NTC |
Housing diameter | 22mm |
Housing length | 188.3 |
Cable length | 10 m, in addition to the customer, 5 m, 15 m and 30 m cables. |
Power consumption | < 0.5 W |
power supply | DC6~12v +/-5%, current<50mA |
Protection level | IP68 |
Housing Material | POM |
