Mini Remote Control Starter Kit For Arduino , Basic Electronic Starter Kit For Arduino
Quick Detail:
1. Using the Adult diy kit for Arduino Starters, You can do many different tests
2. The kit is also very easy for starters
3. Hot sale Adult diy kit
4. Good quality electronic Kit
5.This is an Electrtonic block kit for Arduino Starters
6.The kit is also very easy for starters, Detail manual will be provided.
Description:
This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.
Specifications:
kit list:
mini remote control | 1 |
Colorful Bread Line | 30 |
USB Cable | 1 |
8 * 8 dot matrix | 1 |
RGB module | 1 |
74H595 | 1 |
LM35 temp sensor | 1 |
Infrared receiver | 1 |
Flame sensor | 1 |
Adjustable resistance | 1 |
Photoresistor | 3 |
Ball switch | 2 |
4 digital tube | 1 |
battery box | 1 |
Digital tube | 1 |
Key switch | 4 |
Passive Buzzer | 1 |
Buzzer | 1 |
Resistor 10K | 5 |
Resistor 1K | 5 |
Resistor 220 Ohms | 8 |
LED lights green | 5 |
LED lights yellow | 5 |
LED lights red | 5 |
packaging box | 1 |
830 holes Breadboard | 1 |
uno R3 board | 1 |
uno R3 board Summary:
Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Clock Speed: 16 MHz
Photos: