---Size: 260x130x55mm
---Cable Length: 39 cm
---Connectors: 6 PIN X 10 Pcs
---Number of Interfaces:10
---Fit For: S9(12.5T/13T/13.5T) S7 Ant Series Machine
---Voltage Range: AC 176~264 V
---Input Rated Voltage: AC 200~240 V
---Starting Inrush Current: ≤80 A
---Maximum Input Current: ≤10 A
---Efficiency: ≥92%
---Output Rated Voltage:DC 12.25 V
---Load Regulation: ≤±2%
---Linear Regulation: ≤±1%
---Rated Output Power: 1800W(Max)
---Output Current: 0~130 A
---Output Ripple And Noise: ≤180 mVp-p
---Drive And Shut Down Overshoot Range: ≤±5%
---Rise Time: ≤100 ms(230 V rated load test)
---Boot Time: ≤3 S(230 V rated voltage test)
---Hold Up Time: ≥10 mS(230 V rated voltage test)
---Input Under-voltage Protection Point: ≤180 V
---Input Under-voltage Recovery Point: ≤185 V
(Can automatic recovery, the backlash is not less than 5V)
---Input Over-current Protection: Yes
(The over-current point is between 130~160A)
---Output Short-circuit Protection: Yes
(Recovery after removal of short circuit)
---Input Over Temperature Protection: Yes
(When the temperature switch is higher than 100 degrees, protect, turn off the 12V output, and the temperature can be restored
automatically below 65 degrees centigrade.)
---Operating Temperature: -40~+50℃ Full Load (Typical value is 25 ℃)
---Storage Temperature: -40~+85℃ (Typical value is 25 ℃)
---Operating Humidity: 5~95% Frost-free
---Storage Humidity: 0~95% Frost-free
---MTBF: 50000 H (Typical value is 25 ℃)
---Altitude: ≤ 5000 m (Normal Work)
---Heat Dissipation Mode: Air Blast Cooling
Package Included
---1 x Power Supply