Features:
Feeding sets are DEHP-free and latex-free
Safe-T-Valve on feeding sets are designed to protect against runaway feeding if set is improperly loaded or becomes dislodged from pump
Free-Flow Alarm: Stops flow and alerts caregiver to free-flow condition when set is properly loaded
Smart Pump: Dial settings designed to take the guesswork out of pump programming—making operation easy to learn, easy to use, and easy to teach
Programmable Hold: If caregiver desires HOLD for other than 5 minutes for patient care, another interval (1 to 90 minutes) may be selected
Lockout Features: Allows caregiver to temporarily disable SET RATE, SET DOSE, and CLEAR VOLUME dial settings to prevent unauthorized or accidental changes

Important Safety Information
THIS PUMP IS FOR ENTERAL USE ONLY - NOT FOR IV USE
Confirm proper placement and function of patient's enteral feeding tube (nasogastric, jejunostomy, gastrostomy, etc) and verify the following before initiating feeding:
1. Only an t Nutrition Enteral Pump Set is being used
2. Flow rate is set at the prescribed mL/hr
Pump set and container should be replaced as needed, or at least every 24 hours, to avoid fluid-contamination problems.
See Pump Operating Manual for Complete Safety Information and Instructions for Use.

Working Conditions:

a) Ambient temperature:5℃～40℃；

b) Relative humidity:30％～80％；

c) Barometric:860～1060hPa；

d) Power supply:AC220V,50Hz

e) Battery:Ni-H2 battery group 9.6V,1600mAh

Alarm function:Sound and light alarm as following situations

a) Without any operating when switched on

b) when reach reques volume

c) low battery

d) Feeding tube is in empty,blocked and folding

e) When working loss of AC supply suddenly

Main Technique Parameters:

a) Infusion rate:0ml～999ml,≤±10%

b) Total volume:0.1ml～999ml,≤±10%

c) flow rate:1ml/h～300ml/h；

d) Infusion accuracy:At 1ml/h～50ml/h,range:1ml/h,≤±10%；

At 50ml/h～300ml/h,range 5ml/h,≤±10%

e) Power consumption:13VA

f) Size: 193mm×130mm×105mm

g) N.W:1.6kg

h) Feeding tube:Special feeding tube