Veterinary Ultrasound Machine/vet Handheld Ultrasound Scanner/vet Ultrasound
Warning:
1. Don’t move or insert the plug of the connector for fear of damaging the probe and main frame; once the probe and the main frame are connected, please do not move or insert the probe for fear of causing loose contact. Moving or inserting the probe can be conducted only when the machine is shutdown.
2. For double probe faucet machine, the lower one of the two faucets is the standard probe opening, the higher one is the selective probe opening. Misconnection should be avoided by all means.
● Installation VGA Output
The equipment, equipped with DSTN processing module, can display image on colorful screen by inserting VGA input plug of the colorful screen or line-by-line screen into the “VGA Output” socket on the back panel and tightening it, and then inserting the power source plug into the standard three pins socket of the power source.
Grounding Protection:
The equipment’s power source socket should be the standard three pins socket, and the earth point (terminal) under its protection should be connected with the earth lead.
If the power source socket is under no protection or disconnected with the power supply system and protective earth system, the “Protective Earth” shall be conducted. Users shall apply a metal lead with sectional area no less than 1.0mm to connect “earth rod” on one end and ground wire on another.
Note: ground wire shall be laid by users according to relevant standard or under the guidance of skilled electrician.
If any questions,please feel free to contact me!