Veterinary Portable Cow Ultrasound Scanner for Pregnancy Test STT-51353A-600B
1. Basic Principle
Ultrasonic Diagnosis Equipment is on the basis of different density and ultrasonic transmission speed, and different acoustic impedance (product of media density and velocity of sound), to regular electric impulse actuate piezoelectric wafer (transducer), ultrasonic at some frequency is produced, injecting the ultrasonic (sound wave) into body, reflection echo will be produced via different viscera’s interface, then the reflection echo can be absorbed by the transducer injecting such ultrasonic, when the transducer will convert the reflection echo (sound wave) to electric impulse, which after enlargement, examination and digital scanning, shall become standard video signal and display the intersection image of the organ on the screen of the monitor.
2. Technical Specification
The main functions of the main probe
2. 1. 1 The frequency of Electronic Convex Array probe is 3.5MHz(R=60)
2. 1. 2 Depth display: ≥190mm
2. 1. 3 Resolution (vertical direction): ≤1mm (depth ≤130mm)
≤2mm(130mm<depth ≤160mm)
2. 1. 4 Resolution (cross direction) ≤2mm (depth ≤130mm)
≤3mm(130mm<depth ≤160mm)
2. 1. 5 Precision of geometric position :cross direction≤10%; vertical direction≤ 5%
2. 1. 6 Blind Zone(mm): ≤4mm
2. 1. 7 The conversional frequency points of the main probe (3.5MHz Convex Array probe) are: 2.0MHz﹑3.5 MHz﹑4.5 MHz﹑5.0 MHz﹑5.5 MHz﹑6.5 MHz﹑7.5 MHz , the detailed requirements of the conversion frequency points are as follows:
The frequency of probe (MHz) | f≤2.5 | 2.5<f≤4.0 | 4.0<f≤5.0 | 5.0<f≤10 | |
Type of probe | liner array , R≥60mm convex array | liner array , R≥60mm convex array
| liner array , R≥60mm convex array
| Superficial R≥60mm convex array
| (intra-cavityprobe ) R<60mm convex Array) |
Resolution (Lateral direction) mm | ≤3 (depth)≤130) ≤4(130<depth≤160) | ≤2 (depth≤130) ≤3 (130<depth≤160) | ≤2 (depth≤60) | ≤1 (depth≤60) | ≤1 (depth≤40) |
Resolution (Vertical direction) mm | ≤1 (depth≤130) ≤2 (130<depth≤170) | ≤1 (depth≤130) ≤2 (130<depth≤170) | ≤1 (depth≤80) | ≤1 (depth≤80) | ≤1 (depth≤40) |
Blind zone,mm | ≤4 | ≤4 | ≤3 | ≤3 | ≤5 |
Utmost depth display,mm | ≥190 | ≥190 | ≥120 | ≥80 | ≥60 |
Precision of geometric position,% | Lateral≤10 Vertical direction≤5 | Lateral≤10 Vertical direction≤5 | Lateral≤10 Vertical direction≤5 | Lateral≤5 Vertical direction ≤5 | Lateral≤10 Vertical direction≤5 |