Pig/Dog/Horse/Cattle Used Ultrasound & Full Digital Vet Palm Ultrasound Scanner

Check Before Starting

Before starting, pls check the following item

Power Examination

Should always check the instrument power supply, when the supply voltage exceeds the specified range of adaptation instrument (AC220V ± 22V, 50Hz ± 1Hz), there shall be booted

Always check the power cord and the instrument probe cable, if found damaged, breakage, should be replaced immediately.

After the boot panel cooling fan should check whether the normal operation should be stopped if found shutdown process.

Open Power Supply

1) Open power supply, allow the device to complete the boot menu and the image will appear.

2) Check whether the probe surface when using abnormal heat

3) Complete the following steps:

Check image,ensure there are no any non-normal situation

Check the control panel, make sure buttons and knobs work properly.

You should also check the following items are normal:

4.4 Diagnosis

Put gel on veterinary’s parts, and make the probe touch examination organs. In this case the screen section image will be displayed on the screen. If changing the direction and inclination of the probe can observe different images section , select the desired image section , as a basis for diagnosis. In the meantime, if the image's brightness , contrast and gain inappropriate , you can adjust the brightness of the monitor repeatedly , contrast, or adjust the signal gain until you get a clear picture.

Reboot Instrument

When an exception occurs appear following situations , you can switch off / on the way to restart the system :

1) The screen displays an error message, further more, the message is always displayed ;

2 ) display abnormal ;

3 ) the system is not operating properly .

Power off

1) be sure to turn the unit off when don’t use machine. Before turning off the power, you should follow these steps:

2) probe should be put in the corresponding probe cup sleeve.

3) according to the operation manual request to close all of the power device.

Warning: In order to ensure the safe and effective operation, it should routine maintenance and inspection. Please perform the following examination before each start. Upon checking into the abnormal situation, immediately shut down the system and contact our company marketing department, service department or dealer. If you use the non-normal system will hurt patient and equipment.