Automatic ENT Examination Chair , Doctor And Patient Chair,ENT Chair
Specification:
Parameters | |
shift scope of cushion | 150m above |
backrest pitching scope | 90°-175° |
shift scope of headrest | 0-60mm |
railing adjusting scope | 360° |
arounding scope | 360° |
maximum load | 135kg |
dimension | 800*645*1150/1330mm |
Packing Details:
Packing Details | Quantity |
main apparatus | 1 Set |
Hand shank | 1 Piece |
Headrest | 1 Piece |
Cable | 1 Piece |
Instruction | 1 Piece |
Certificate | 1 Piece |
Warranty card | 1 Piece |
Doctor chair | 1 Piece |
Usage:
ENT chair electric lift, it will be connected to AC 220-240V, Frequency 50-60Hz power supply, according to the control unit back on the lift button or foot switch on the lift operation of lift buttons or switches can be identified.
Seats need to rotate when the direction or position lock can be installed on the base of the pedal disc locking device can be opened or locked.
Need to adjust the angle of the first frame position, the first head frame lift handle, after the first frame and then adjust the angle or height, positioning, will handle press can be.
When the lock failure can be covered at the bottom of the first frame female screw, will lock the mother inside EYE clockwise precession, after appropriate adjustment, and then covered the mother can tighten the locking precession.
Such as the need to replace the fuse, first unplug the power plug, you can use the screwdriver to replace.
Note:
1, ENT chair seat rotation, the first frame to adjust the angle, they all must first adjust the device lock to open and then adjust the body is strictly prohibited mandatory moving to avoid the locking body malfunction.
2, the need to connect with the operation control table, pay attention to first check whether the line matches the aircraft wiring methods, whether uniform or universal, to prohibit access to avoid mistakes in the wrong lead to an overall line damage.