Surface Mount Installation
1. Take out lamp from the packaging, and take off two springs from the panel light
2. Make drill hole marks according to switch bracket hole position in advance
3. To drill two holes on the wall / ceiling as marked
4. Fixed the PC switch bracket tightly with screw driver
5. Connect AC wire (live line, zero line and ground line) to the connectors according to the marking
6. Point the panel light without springs to the swtich bracket (the arrow mark shows direction), push it strongly, it is ok.
Shape | Watt | Dimmension (mm) | Cut Out (mm) | Voltage | Driver | PF | CRI | Luminous Efficiency | Housing |
Round | 9W | Φ115*40 | Φ100 |
170-265V 50/60Hz |
Non Isolated |
0.5 |
>70 |
100lm/w |
PC |
15W | Φ165*40 | Φ152 | |||||||
22W | Φ220*40 | Φ210 | |||||||
Round | 9W | Φ115*40 | Φ100 |
90-265V 50/60Hz |
Non Isolated |
0.9 |
>70 |
100lm/w |
PC |
15W | Φ165*40 | Φ152 | |||||||
22W | Φ220*40 | Φ210 | |||||||
Round | 9W | Φ115*40 | Φ100 |
90-265V 50/60Hz |
Non Isolated surge1.5KV) |
0.9 |
>70 |
100lm/w |
PC |
15W | Φ165*40 | Φ152 | |||||||
22W | Φ220*40 | Φ210 | |||||||
Square | 9W | 115*115*40 | 100*100 |
170-265V 50/60Hz |
Non Isolated |
0.5 |
>70 |
100lm/w |
PC |
15W | 165*165*40 | 152*152 | |||||||
22W | 220*220*40 | 210*210 | |||||||
Square | 9W | 115*115*40 | 100*100 |
90-265V 50/60Hz |
Non Isolated |
0.9 |
>70 |
100lm/w |
PC |
15W | 165*165*40 | 152*152 | |||||||
22W | 220*220*40 | 210*210 | |||||||
Square | 9W | 115*115*40 | 100*100 |
90-265V 50/60Hz |
Non Isolated surge1.5KV) |
0.9 |
>70 |
100lm/w |
PC |
15W | 165*165*40 | 152*152 | |||||||
22W | 220*220*40 | 210*210 |
Applicable For
• It is perfect option for low plenum clearance for indoor lighting, such as residential, hospitality, school, underground park, restaurant, hotel, supermarket, showroom, meeting room , workshop, office , exhibition hall , commercial and multifamily
• applications with confined, hard to reach spaces such as closets, attics, hallways, stairwells, elevators, soffits, porches and entry ways.