Electric Chain Hoist For Lifting Material Handling Equipment

Product Description

Electric Chain Hoist For Lifting Material Handling Equipment is one of the most important features for Pendent control electric chain hoist. To ensure the highest possible reliability levels in day to day operation, our crane systems are made to the most stringent quality standards. This model crane widely used in factories, mines, Bridges, construction and other work place for materials handling, equipment installation, etc. Especially be suitable for high-rise building construction and welding storage tank with a number of crane.

Product Characteristics

The performance structure of Electric Chain Hoist For Lifting Material Handling Equipment is relatively advanced, small size, light weight, wide range of use.

Electric Chain Hoist For Lifting Material Handling Equipment is very convenient for lifting heavy objects, loading and unloading work, maintenance equipment, and lifting goods. It can also be installed in the hanging i-bar, curve track, rotary boom guide and fixed lifting points to lift heavy objects.

1. Enclosure: the enclosure is light and strong, with high heat dissipation rate and full sealing design, which is suitable for use in the environment with poor operating conditions.

2. Reverse phase protection device: it is a special electrical device. When the power connection is wrong, the control circuit cannot work.

3. Limit switch: there are limit switch devices in the lifting and lifting of heavy objects to make the motor stop automatically to prevent the chain from exceeding and ensure safety.

4. Transformer: it can prevent accidents if the switch leakage occurs during operation.

5. Braking device: this device can brake instantly when the power is cut off.

6. Chain bag: light, beautiful and durable.

7. Chain: adopt imported FEC80 heat-treated alloy steel chain.

Matters Needing Attention

• In order to ensure normal operation, no-load operation must be carried out. Power is not allowed to work before installation and debugging, after the completion of installation and debugging power can be no load.
• When operating the endless chain electric hoist, static load test is often required. The general approach is to increase the set rated load, test load, and carefully observe the use of the electric hoist, at any time to identify its load value, identify the rated load, so as to determine whether the chain electric hoist meets the use requirements.
• The lubricating oil should be clean and free of impurities. When applying lubricating oil, apply it evenly. The amount of oil is moderate. Too little or too much can cause serious consequences. Because the oil density is large, daub too much will lead to poor heat dissipation, reduce the service life of the electric chain hoist. And applying too much oil can cause the outer layer to absorb more dust or dirt, causing more trouble for cleaning later.
• Also regularly check the bolts and power lines for fixing the miniature hoist, and timely remove dust and corrosive liquid accumulated on the cable.

Parts Of Crane