WPCE Lubricator Lightweight Integral Lubricator Wellhead Pressure Control Equipment

The wireline lubricator is used to accommodate wireline tools string. According to requirement of oilfield operation, there are upper, medium or lower lubricator available and either the medium or lower one is with pressure relief port.The lightweight lubricator can be applied for singly also can use multiply according to the requirement of the oilfield wireline operation, and the seal control head always be assembled on the top of the lubricator. The length of single lubricator is 0.8-3m, the number of lubricator and total length will depend on operation. There are two types of material available for the wireline lubricator, one is the normal one, the other is Titanium alloy which is much better quality and lightweight than normal steel materials. The lubricator enable the wireline tool string to be run or retrieved from a well bore under pressure.

Specification of Integral Lubricator

Strict quality control system

Techcore oil tools is certified by ISO, all the manufacture is strictly conformed with ISO system including Quality Control Management, Environmental Management and Occupational Health & Safety Management. For each downhole tools and each parts, we make the trace-ability from the raw material till the products. And any TPI inspection are available with us from SGS/BV/ TUV /DNV etc..

Continuous after sales service

Techcore provides the prompt after-sales service to our customers to guarantee your benefits. For the complete downhole tools, we provide the free training in our factory, and if you need the site instruction, we can appoint our technical engineer to your site for the training.

Welcome to contact us for information about the downhole tools