GPD60 Series Industrial Explosion-Proof Mining Pressure Transmitter
The GPD60 mining pressure sensor uses a turbine for measurement. It first converts the flow into the speed of the turbine, and then converts the speed into an electrical signal proportional to the flow. This flowmeter is used to detect instantaneous flow and total cumulative flow, and its output signal is frequency, which is easy to digitize. The induction coil and magnet in the picture are fixed on the housing. When ferromagnetic turbine blades pass through the magnet, the magnetic resistance of the magnetic circuit changes, resulting in an induction signal.
All stainless steel structure, sturdy and reliable, resistant to strong impact, drop and shock;
Meet the requirements of 500VDC insulation and 500VAC withstand voltage;
3 times overload, 5 times destructive pressure (only for micro melting sensors);
High protection level, reaching IP67 standard;
Working temperature range | -10~+60℃ |
Storage Temperature Range | -40~十60℃ |
The impact of environmental temperature changes | 0.03%FS/℃ |
Stability | 0.02%FS/year |
Output | current output 4-20mADC two-wire |
Power supply | 10~30VDC |
Protection grade | IP67 |
Accuracy class | 0.5% |
Measured media | Non corrosive fluids for stainless steel and fluororubber |
Power consumption | The current output type is 0.5W, and the voltage output type is 0.1W |