Quick and easy Mud Tank System For ZJ20 to ZJ70 Solids Control System

Mud tank systems are a critical component of any drilling operation for maximizing solids control efficiency and effectiveness. The Ideal Mud Tank System is a two-tank unit with a total active (operating) capacity of 1318 barrels (total/nominal capacity of 1500 barrels). The system comes complete with all the essential solids control equipment necessary for successful operations. Additionally, optional solids control configurations are available to suit the needs of specific applications.

Oil well drilling mud solids control system is very important for drilling efficiency to enhance and cost-save. Whole drilling mud system including the shale shaker, degasser, mud cleaner, centrifugal pump, decanter centrifuge, mud agitator, mud gun, jet mud mixer, mud tanks, and the mud gas separator.

Drilling mud flows into the mud gas separator and then to the shale shaker. The drilling fluids after filtered by the shaker screen will be sucked into vacuum degasser. Degassed mud is transferred to hydrocyclones on the mud cleaner. In hydrocyclones, normally the solids larger than 44 microns will be separated out of drilling fluids. The drilling mud is transferred by the centrifugal pump from the shaker compartment to the mud cleaner inlet. Under pressure and gravity force, the drilling mud will move under centrifugal force in the cone. Then the heavier solids will be pushed to drop in Apex. Then the clean drilling fluid will be treated by further equipment for better result

Aipu Solids Control's Mud tank system features

• Customized drilling mud purification system.
• Benefits of Low Solids In Drilling Mud.
• Increased drilling penetration.
• Increase bit or back reamer life.
• Reduce investment, but enjoy high efficiency.
• Reduce triplex mud pump, mud motor & surface equipment maintenance cost.
• Reduced cleanup & haul off or disposal cost.

In the mud tanks, no matter for reserve or process tank there are mud agitators to make sure the proper drilling fluid property. For almost solids control system, the agitator will be the lateral type and every set agitator will be fit with the control panel. Besides mud agitators, the mud guns are another mixer to maintain drilling mud quality.

Mud tanks including the process tank, active tank, reserve tank, mixing tank, trip tank, pill tank. Between tanks, there are many different connections and lines. Such as the suction line, the discharge line, the drain port, the cleaning gate, and so on.

One complete set mud system is a very comprehensive design and configuration. The flow lines, the cable laying, the walkway set, and so on.

Aipu solids control produces the drilling fluids solids control system with complete line items. From shaker to centrifuge. From degasser to ignition device. From trip tank to pill tank. From handrails to the lamp.

Please feel free to contact AIPU solids for more information.