APFI Flare ignition device for oil well drilling site degassing process

Flare ignition device is also referred to flare ignitor or gas flamer. It is usually connected with mud gas separator by the vent line, which is at least 60m. So it is the safety equipment, too. For almost poor boy degasser, we suggest use flare ignitor for better gas removal effect. Even for the vacuum degasser, there is gas flamer if necessary. Especially, when we drill a gas well.

Presently, we have one model flare ignition device. However, there are many options on configuration. For example, usually we make the flare ignitor vertical set at site. But some lcients request horizontal type. For the fuel to flame the gas vented from mud gas separator, there is natural gas and diesel oil for options. The flare ignitor will flame harmful gas by the electric spark generated from ignition pin connected with torch. But the fuel source is necessary to flame the gas out of degasser.

Why we need flare ingitor? Because the gas flowed out is flammable and poisonous the flare ingition set behind degasser and connected by vent line. The line is requested at least 60m. This will provide a safe job site. The entrained gas including H2S, CO, methane, get them removed and burned out is the safety assured way.

We provide customization service on many equipment. What is the customizable option on the ignitor? Firstly, the material can be common carbon steel for some little or none H2S content places or drilling sites, if necessary, we suggest the 16Mn steel sheet to resist the H2S gas. Furthermore, as we mentioned, the installation way can be horizontal or vertial and the power supply can be solar energy or electricity. And the fuel station can be canned natural gas or the diesel oil. Besises those, the control panle can be local or remote control. And the torch height is customizable, too. Common height is 3m. But some clients prefer higher or lower one.

For the colors, considering the use almost of ignition device are painted with red color. So we don't suggest other surface coat oil. Red means warning and danger.

Do you have any demand or question on gas flamer ? Please feel free to contact AIPU solids control. Below specification sheet for your reference. Further question just let us know