Replacement shaker screens for famous brand shaker tested per API 13C

Shale shaker screens are the important wearing parts for whole mud system and even a whole well drilling project. We know the screen is the main consumption in a whole solids control system. Some screens even only are used for 20 hours. This is not meanting the poor quality but the working condition is too difficult.

Why do we need API 13C conformed screen?

API 13C is the recommended practice issued by API decades ago. The complete code is API RP13C. There is specific instruction on the screen manufacture. The main meaning of screen API size is the cut point based on the common standard D100 cut point. So the screens will come into the certain designation

The correct and exact cut point will help users to get the proper screens at a certain drilling phase with the certain drilling fluids. For example, at the early stage of a well drilled about hundred meters, we don't need the screen sized over API 140. Or based on the geological condition, we just need the coarse screen will be enough

Different manufacturers produce screens with different configuration. One supplier told the screen size is 180 mesn, it may be API 140, but the other supplier told the screen is 180 mesh it may be API 170. This is because of the layers and the wire diameter of screen cloth. And based on API 13C confomred screen, they usually have been tested on the conductance. So clients can select the screens from different suppliers freely based on their preference of conductance data.

What is the main configuration of Shaker screen?

There are frames, the wire mesh cloth, the sealing rubber if necessary. And for the screen frames, there are steel framed and composite frames. For steel frames, we need the perforated plate and squre tubers welded together. For the composite frames, we need to weld tubes and the wire rod together for further injection on frames.

For the screen cloth, we supply the shaker screens made of high quality stainless steel 304L to 316L. As the wearing parts, the shaker screen is high cost. Sometimes, the screen panels with high quality material may last shorter than expectation as the service life is very related with configuration, working condition and the mesh size selection.

Why use AIPU Shaker screen?

We have shared in over 20 years of shaker screen manufacture. From the very beginning of screen material selection we treat very strictly. And we configure screens stricly according to our API RP13C report. We do what we say always make our promise. Most of the shaker screens replacement can be made by AIPU.

Everyyear, we deliver over 30000 panels of screens and over 80% of them are repeat orders. We trust the repeat orders from our clients tell the truth of our screen quality. We keep moving on R&D of screen panels. From the material to the new configuration for the best performance.

We have to emphasize, all of the screens replacement for famous brand NOV, , SWACO is just the replacement and we don't have any relationship with the original brand manufacturer.

Features of AIPU shaker screens

High quality raw material

Right fit replacement
API RP13C conformed screen panels
Professional experience
Custom built available

Technical specification of AIPU shaker screens

Please check below technical specifications for your reference. And some configuration is customizable. Please contact us for more details

For any question or demand, please feel free to contact AIPU solids. You will get a free offer on an optimal solution, you will get a professional proposal very soon.