API Centrifuge decanter with tungsten carbide used in drilling mud process system and oil sludge treatment

API Centrifuge decanter is used as the 4th phase solids control and 5th cleaning equipment in drilling mud system. Centrifuge decanter is also referred as decanter centrifuge, decanting centrifuge, centrifuge decanting. In oil and gas drilling, we call then solids control centrifuge or drilling fluids centrifuges. Drilling mud is pumped into centrifuge by screw pump or submersible slurry pump. The treating capacity is from 40-65m³/h. Higher speed centrifuge process less drilling fluids or produce less particles. However, higher speed centrifuge separate finer solids out of drilling mud. Centrifuge mud source is in desilter tank/compartment.

APLW Series decanter centrifuge including middle speed and high speed ones at AIPU Solids. The horizontal decanting centrifuge is 4th phase solids control equipment in whole drilling mud system. Drilling fluids after processed by APLW centrifuge, the cuttings or solids between 2-7 microns will be separated out.

Why we call centrifuge the 4th solids control equipment or 5th cleaning equipment? Because it's behind desilter cone or mud cleaner. The middle speed centrifuge is usually fixed frequency and get rid of 5-7microns cuttings. While the high speed one is usually VFD and separate 2-5 microns cuttings out of liquid.

The material of decanter centrifuge is stainless steel. The minimum grade is S.S304, and then S.S316, S.S316L, Duplex 2205. The screw impeller can be welded or coated with tungsten carbide for better anti-corrosive performance. This will help us to get longer service life and save time to maintain or repair

Besides cuttings separation in drilling mud, the centrifuge is also used to recycle some barite. And decanter centrifuge is widely used in waste management, oil sludge treatment more and more.

The decenter centrifuge bowl size is ranged from 450x1000mm to 530x1320mm. Different size drum will produce different flow rate. Of course the speed is not same on all centrifuge.

Plese check below technical specification on APLW centrifuge for your reference.

For any interes or demand, please feel free to contact AIPU. You will get free offer on optimal solution, you will get professional proposal very soon.