Description of Aipu hydrocyclone desilter

Hydrocyclone desilter is a combination of hydrocyclones mounted above a shale shaker. Usually the diameter of hydrocyclone is less than 6”. Hydrocyclones 4” and 5” are commonly used. Hydrocyclone is adopted good abrasion material to create a longer service life. The more the number of the hydrocyclone is, the greater the amount of fluid is through

High quality hydrocyclone Desilter separator for sale is 3rd phase solids control equipment. Aipu produce hydrocyclone desilter separator with 4" cone. The cones are high quality polyurethane material. Per different capacity demand, the cones number is customizable. Such as 4, 6, 8, 12, 16, 20. Flow rate is from 200GPM to 1500 GPM. So the downstream shaker is customizable as well.

Technical parameters of APCN drilling fluids desilter

Application of hydrocyclone desilter

Hydrocyclone desilter is at the third stage in solids control system which is used for all onshore and offshore applications. It is used for removing fine particles in drilling mud

APCN series desilter is the third phase solids control equipments in well drilling mud system

Drilling fluids desilter separators are one of the important equipment of controlling the solids in the drill fluid. The action is to remove the harmful solids, promote the drill fluid performance and separate 15～47 μm solids particles accounting for over 60% of solids quantity.When the quick drilling is made in the soft formation, the shale shaker only can remove large solids particles, but the Hydrocylone Desilter separators can remove fine solids particles, fully promoting the solids control efficiency. Therefore, it is especially suitable for the well site where the formation is considerable hard and the drilling speed is slower so that the cuttings is very fine in particle size.
As different treating capacity , you can choose the number of cyclone . Normally speaking , 8 no. of cyclone is availeble , and you can choose 10 , 12 , 14, 16, 18, 20 according to your requirement.

Hydrocyclone desilter for oil and gas drilling

Hydrocyclone desilter for oil and gas drilling has two styles according to the arrangement of hydrocyclones, one is arranged as line, and the other is arranged as circle

Features

• High efficiency to remove sand
• Large process capacity
• Less damageable parts
• longer service life

Parameters

• Hydrocyclone number: 10, 12, 16, 20
• Hydrocyclone diameter: 4”, 5”
• Shale shaker motion trace: Elliptical
• Working pressure: 0.2~0.45Mpa
• Process: 130~300m3/h
• Cut point: 20~100um

Hydrocyclone desilter for HDD or trenchless

Hydrocyclone desilter for HDD and trenchless is designed to remove the sand and sized particles before they have a chance to break down even smaller. Hydrocyclone desilter operates efficiently on weighted mud as well as unweighted mud systems. All hydrocyclones are arranged as a line.

Features

• You can control cut point while processing
• You can change hydro cyclones while processing

Drilling fluids dedilter configuration

Drilling fluids desilter is the third phase solids control equipments after shale shaker and desander equipments. It is made by desilter cyclone, inlet and outlet pipeline, steel frame and shale shaker for bottom drying.

The desilter is mainly treat drilling mud by desilter cyclone by centrifugal force. It is popularly use 4” desilter cyclone for separate solids 15 – 25 microns and above, the majority larger solids particles was separated by centrifugal force and drop out from desilter nozzle and fluids content overflow from top outlet and discharge to tank compartment. There maybe a set of shale shaker on bottom of desilter cyclone, it is installed in finner mesh screen for drying solids particles out of cyclone. The mesh size choose from API 140 to API 325 depending on drilling requirement. The desilter mud flow can be 500GPM to 1500GPM depending on cyclone quantity.

For any question or demand, just feel free to contact AIPU solids. You will get a professional proposal very soon.