Shear Pump Fast Configuration And Treatment Mud High-Quality Carbon Steel

Shearing Pump is developed by AIPU has perfect shear and hydration system, which can quickly cut and dilute hydrated polymer. designed to reduce the cost of mixing polymers and clays while improving mud properties, it shears the polymers eliminates fish eyes, and prevents polymer chaining which can't pass through the shaker screen.

Oil drilling mud shearing pump is one kind of centrifugal pump holding a special impeller. APJQB shear pump is designed to mix polymers and clays as well as other mud or solids material at a lower cost and higher efficiency. It can shear polymers and eliminate the fish eyes to prevent polymer changes, which can't pass through the shaker screen.

Shearing pumps can be set alone on a mud tank or together with a mixing hopper to be the jet shearing pumps. We have introduced this in mixing hopper pumps. The special design on the shearing pump is the impeller. There are sharp teeth knives at the impeller edge/side. This design will help the user to get the complete sheared materials for drilling mud. When we combine the shear pump and the mixing hopper, that means the common centrifugal pump head is replaced by a shearing pump head holding the special impeller. The integration of working efficiency will be dramatically enhanced. The user is satisfied with the configuration of high-performance mud. This series Shear Pump can mix effectively and hydrate completely the material added in the drilling fluid, save the mud material, reduce the time of configuration, and provide the high-performance mud for the well drilling.

specifications

The characteristics of the shear pump

• It greatly enhances the hydration of the soil particles.
• Makes the compounds dilute, shear and hydrate in a shorter time while saving over 30% of bentonite.
• It offers a larger capacity and lifts to meet the demands of concoction and mud processing.

How many different models of the shear pump at AIPU Solids?

APJQB6545 and APJQB6535. The important difference between them is power. So the flow rate is different then. How do we design the shearing pump? For the shearing pump, all of the pumps are designed as driven by a belt connected with the motor. Not the horizontal installation as other pumps. Such a design will help to occupy less space area. On the pump base, there is a flexible adjustment on the distance between the pump head and motor. Since the belt may lose or deform after being operated on for a long while. Then we move the pump side or motor side the belt can be tensioned tight again.

Drilling fluids processed by a shearing pump then flow through the whole system for better drilling performance and lower cost expense. During whole well drilling, drilling fluids property may vary at different sections or times. So the proper process is very important. The shearing pump can help users get better fluids in the different drilling processes. It will benefit drilling much.

Features

• Unique mechanical composite seal technology, ensuring no leakage.
• High wear-resistant metallic material impellers and casing will prolong service life.
• Impeller structure that accords with the principle of fluid mechanics will increase liquidity.
• The efficient and low shear force will reduce cost.

proposal very soon.