Rotary ST200 Water Well Drilling Rig , Borehole Mining Diamond Core Drilling Rig

Diamond Core Drilling Rig Parameter

Drilling machine manufacturers for you to introduce the rural drilling equipment is how to drill wells

Generally, water source wells are divided into deep wells, large wells, counterpart pumping wells and small diameter tube wells. Therefore, it is suitable to drill deep wells in areas with rich deep groundwater, while it is suitable to drill large-diameter wells, counterpart pumping wells or small-diameter tube wells in areas with rich shallow groundwater

In general, the use of rural drilling equipment requires the use of correct construction methods

There are two construction methods for large open well: one is large slotting method, manual excavation or blasting construction; the other is open caisson method, drainage construction or non drainage construction. The suitable method should be determined according to the local geological conditions.

Generally, mechanical and manual hanging hammers are used in the construction of the mouth drawing type. The suction pipe is directly driven into the ground by the gravity of the hanging hammer. The proportion of counterpart pumping wells in the existing wells is large. This well is economical and practical, and farmers choose more.

Four functions of lubrication for water well drilling rig

1) Reducing friction: This is the main function of oil lubrication. Due to the existence of lubricating oil film, the direct contact of the metal surface of transmission parts is prevented, so as to reduce the magic friction resistance and wear loss.

2) Cooling and heat dissipation: in high-speed rotating parts, complete heat is generated due to friction. If the heat surplus is not dispersed, the temperature will continue to rise, resulting in the burning of parts.

3) If the grease is applied on the surface of the drilling machine that is easy to rust, it can prolong the service life of the metal parts that are easy to be sprayed by the rain and prevent rust.

4) sealing blockage: wool felt is installed on the sealing packing and bearing end cover to effectively seal and prevent dust due to oil immersion.