150 Meters Deep Well Borehole Drilling Machine Fore Farming Civil Industry

XY-1A Borehole Drilling Machine Introduction

Xy-1a drilling rig is a hydraulic feed portable drilling rig, 150 meters drilling depth ,150mm hole diameter , It is a kind of hydraulic feeding, high speed, high speed torque belt and portability with pump.which is suitable for engineering geological exploration of industrial and civil buildings, railways, hydropower, transportation, bridges, dam foundations and other buildings.

XY-1A Borehole Drilling Machine Tech Data

XY-1A Borehole Drilling Machine Advantages

1. It has a hydraulic automatic feeding mechanism to improve drilling efficiency and reduce labor intensity.
2. It adopts the ball card clamping mechanism instead of the chuck, and can implement the non-stop bar, easy to operate, safe and reliable.
3.The hoist is equipped with a frame to form a double-sided support star structure that can withstand strong impact.
4.Four sets of bearing positioning of the vertical axle box ensure that the gyrator has sufficient rigidity to deal with complex geological conditions such as gravel layer and pebble layer.
5.This machine adopts a taper clutch, which has the characteristics of large transmission torque, convenient operation and maintenance-free.

XY-1A Borehole Drilling Machine Application

XY-1A drilling rig is mainly used for geological general investigation and exploration, road and tall buliding foundation exploration, kinds of hole in concrete structure, river levees,earth temperature central air-conditioner,etc.XY-1 Series are spindle core geotechnical drilling rigs most perfectly suitable for borehole drilling in geo-construction and geo-technical exploration drilling in projects like civil building, construction of railway, hydropower, highway, bridge and dam etc. Typically, they are mainly used for:

The five main types of wells are digging, driving, drilling, drilling and jetting (Flushing).

Most digging and drilling equipment is available, or because drilling is considered too expensive, the front hole is built-in. Modern wells are usually lined with concrete tiles and have a large diameter, providing a large opening for the aquifer. This allows them to get water from very fine materials such as sand, silt or clay. The wells are shallow and there is no continuous casing, which makes them polluted by nearby pollution sources.

Drive wells are made by driving small diameter pipes into shallow water, sand or gravel containing sand. The construction of these wells is relatively simple and economical, but they can only dig shallow water and are as easy to be polluted as digging wells.

The drilled well consists of a large auger. The depth of boreholes is usually about 50 to 70 feet. They are usually made of soft materials, such as sand, silt, clay and soft rock.

Use percussive or rotary drilling machines to construct drilling. These wells can be more than 1000 feet deep. Wells that penetrate less hard and firm land require casing and screens to prevent the inflow of sediment, which can lead to well collapse.

Force high-pressure water into underground drilling jet or flushing wells. This construction method can only be used for soft soil foundation.