High Drilling Speed Diesel Engine Investigation Engineering Hydrualic Borewell Machine

XY-1A Hydraulic Borewell Machine Description:

It can be matched to the corresponding motor or diesel engine.small drill rig widely used in drilling family wells, drilling industry wells and drilling survey geological sampling, SPT service etc. Drilling dia. will from 50-150mm or larger according to clients requirement. Different layer condition will need different bits, soil or soft layer will need clay bit, or ally bit, drag bit, for hard rock will need diamond bit, tricone bit etc.

XY-1A Hydraulic Borewell Machine Technical Data:

XY-1A Hydraulic Borewell Machine Features:

XY-1A Hydraulic Borewell Machine Usage Scope:

The drilling rig is applicable to the engineering geological survey of industrial and civil construction, railway, hydropower, transportation, bridge, dam foundation and other buildings; Geological core drilling and physical survey; Drilling of small grouting holes, geothermal holes, blasting holes and various concrete inspection holes; Small well drilling.The rotating speed range is wide and equipped with high-speed gear. Diamond, cemented carbide and steel particles can be selected for drilling according to different geology.

How to avoid contamination of hydraulic system of water well drilling rig?

As the working medium of hydraulic system, hydraulic oil plays the role of power, lubrication and heat dissipation. Therefore, the hydraulic oil is directly related to the normal operation of the hydraulic system of the drilling platform. In the hydraulic system, most faults are caused by dirty hydraulic oil. Therefore, in the research, development, design, manufacture and use of hydraulic system, the pollution of hydraulic oil in the system should be actively controlled. So, how to avoid the pollution of the hydraulic system of the drilling platform and avoid the pollution of the hydraulic system of the drilling platform, we need to pay attention to the following points: (1) try to select hydraulic accessories and components with low pollution sensitivity. (2) Correctly select and reasonably arrange the oil filter device of the system to make the filtration efficiency, filtration accuracy and pollution capacity of the system meet the design requirements, and ensure that the system has sufficient pollution degree, steady-state cycle and pollution self purification capacity. (3) In the system structure design, reduce and eliminate pollution sources as much as possible (that is, reduce the pollution generation rate) to reduce the intrusion pollution when the system works. If the design of isolated oil tank and closed system is adopted, reliable anti pollution measures shall be taken for the oil drainage and exhaust device to avoid dead corners and blind ends of the pipeline