Easy Movement 22 Hp Diesel Engine XY-1A Portable Hydraulic Borewell Machine
XY-1A Portable Hydraulic Borewell Machine Introduction
This is a portable drilling rig with oil pressure feed. Rated drilling depth 150m; The drilling depth depends on the formation conditionsIt is suitable for industrial and civilian drilling, geothermal drilling and other well holes, especially for water intake projects in rock formations in mountainous areas..
XY-1A Portable Hydraulic Borewell Machine Parameter
Drilling depth | 150m |
Drill rod caliber | 50 42mm |
End hole caliber | 75 46mm |
Max. open hloe caliber | 220mm |
Drilling angle | 90°~75° |
Drill weight (No include power) | 610kg |
Unity machine dimensions | 2.1*0.9*1.3m |
Spindle | |
spindle speed | 130, 300, 480, 730, 830, 1045r/min |
Spindle stroke | 450mm |
Hoist | |
Max.single line hoisting capacity | 1600kg |
Single line lifting speed | 1.06, 0.67, 0.32m/s |
Wirerope caliber | 13mm |
Wirerope cubic measure | 35m |
Hug floodgate caliber | 254mm |
Hug folldgate belt width | 50mm |
Distance between drill and hole | 230mm |
Mud pump | |
Type | Horizontal single urn twin-action |
Displacement | 170L/min |
Maximum pressure | 1.5Mpa |
Work pressure | 0.7Mpa |
Power | |
Diesle engine | S1105 18HP |
Electric motor | Y160M—4 15KW |
XY-1A Portable Hydraulic Borewell Machine Characteristic
1. It improves drilling efficiency and reduces labor intensity With hydraulic automatic feeding mechanism.
2. Easy to operate, safe and reliable with ball clip holding mechanism or hydraulic chuck.
3. It has hole bottom pressure gauge to be easy to master the situation in the hole.
4. It also has advantage of Compact structure, concentrated handle, small footprint, light weight, strong decomposition, easy to move. It can be operated in plains and mountain areas.
XY-1A Portable Hydraulic Borewell Machine Water Source
According to the geographical location, it is well known that water flows to the place. As the saying goes, it is most beneficial to find water in the pinch land surrounded by mountains on three sides. Because of the low-lying terrain, the groundwater will flow to the pinch mouth. There is a high probability of drilling wells near the pinch mouth to get water. The two ditches intersect, and the spring water is choppy, that is, there may be water accumulation under the mountain mouth at the intersection of the two ditches.
How to select the drilling section.
When selecting the place for drilling wells, try to avoid selecting suburban or smaller towns or rural areas, because the sewage or drainage facilities in these places are not sound enough, so it is easy to pollute the water quality of the wells. In addition, some suburban or village areas have some farmland or vegetable fields, and the current crops are all applied with chemical fertilizers and pesticides. Therefore, if these pesticides and fertilizers are not easy to decompose in the land, they will seep into the underground water with the water source. Therefore, we should keep away from the polluted areas as far as possible when drilling wells. If there are farmland or vegetable fields around, it is suggested to drill the well deeper and make anti-seepage treatment around the well if the well drilling machine cannot be avoided. Hollow cement columns can be used to form isolation.