Boring Machine Portable Hydraulic Deep Well Bore Machine Water Well Drilling Rig For Sale

GK 200 Soil Testing Drilling Rig Introduction

GK200 Drilling rig with hydraulic feeding is widely utilized and featured in high power and hoisting load(2T),Large torque transmission,etc.The rotating speed of vertical hexagonal spindle varies between 71r/min-825r/min.It is suited for the geotectonic survey,geological core drilling,small hole drillings for grout,blast and water well in railway,water conservancy,bridge,dam foundation and other construction.Diamond drill vit,alloy drill bit and steel roller drill bit are available for drilling according to different geological structures.

GK 200 Drilling Rig Technical Data

Precautions during assembly and disassembly of coring rig:

a. During component disassembly, the locating pin shall be removed first and then other disassembly work shall be carried out. During installation, the locating pin shall be installed first after the position is aligned, and then other parts shall be installed.

b. Protect the joint when removing the oil pipeline.

c. The disassembly times of oil pipeline joints shall be minimized to avoid oil leakage.

d. During disassembly and installation, it is forbidden to strike the casting with force. When it is necessary to strike other accessories, wooden blocks or red copper blocks shall be padded

e. Before installation, the parts shall be cleaned with kerosene and coated with sufficient lubricating oil (or grease). The powder metallurgy shaft sleeve shall be carried out according to the provisions in the section of "use and maintenance".

f. Replace damaged or worn parts

g. When installing the diesel engine, pay attention to check the coaxiality of the crankshaft and the worm.