200m Geological Exploration Soil Detection Hydraulic Borewell Machine Drilling Rig

GY-200 Soil Test Drilling Machine Summary

General geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river embankments, subgrade grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc.

GY 200 Soil Testing Drilling Rig Product Parameter:

GY 200 Soil Testing Drilling Rig Mainly Application:

1. In the general survey and exploration of mineral deposits, especially those of nonferrous metals and rare metals, tunnel drilling is used to trace deposits, to explore geological structures, to delineate ore bodies, to sample and verify.

2. In mine excavation, tunnel drilling technology is commonly used to drill underground observation holes, ventilation holes, drainage holes, gas drainage holes, grouting holes, blasting holes, anchor holes and pilot holes for digging tunnels.

3. In other geotechnical engineering construction fields, the equipment and technology of tunnel drilling can be used for slope reinforcement of dam foundation, treatment of geological disasters, support of deep foundation pit, and underground engineering construction of industrial, commercial, traffic, military and other aspects.

4. It is used for the construction of building foundation, workshop foundation, high-speed railway foundation, highway foundation and other rock foundation foundation.

Transportation of water well drilling rig

1. When loading and unloading the water well drilling rig, a flat place shall be selected.
2. Special unloading platform shall be used for loading and unloading.
3. An assistant must be on site to guide, and irrelevant personnel shall not be allowed to approach.
4. After loading, put the suspension rod to the lowest position, pull on the hand brake, put on the reverse gear, pull out the start key and turn off the main power switch
5. Fix the front and rear "eight" of the four tires with iron wire, firmly wedge the front and rear of the tires with wedges, and pull the rear bridge with iron wire.
6. Pull the rearview mirror inward as far as possible and remove it if necessary.
7. When crossing culverts and bridges, pay full attention to whether there is superelevation, and fully slow down when turning.
8. When unloading, release the hand brake first, engage the forward gear and drive down slowly at the lowest speed.