Tension Sleeve Safety Joint RTTS Safety Joint For DST Service
The Tension Sleeve Safety Joint is the full bore RTTS Tools used in oil well downhole testing service, fracturing and cementing operation. The RTTS safety joint is used with RTTS packer during operation, as an optional tool that aids in removal of the workstring if the packer becomes stuck (cemented in, stuck in collapsed casing, etc.). To initiate the release of the safety joint, part a tension sleeve by pulling on the workstring with enough overpull to shear the tension sleeve.
Technical parameter of Tension Sleeve RTTS Safety Joint
Nominal Size | 4 1/2-5” | 5 1/2-6 5/8” | 7-7 5/8” | 8 5/8-20” | ||||||||||||||||||||||||||||||||||||||
OD | 93.5mm | 103.1mm | 127.5mm | 155.5mm | ||||||||||||||||||||||||||||||||||||||
ID | 48mm | 50.8mm | 62mm | 79mm | ||||||||||||||||||||||||||||||||||||||
Length | 1033.4mm | 1083.7mm | 1160mm | 1195.5mm | ||||||||||||||||||||||||||||||||||||||
Working Pressure | 70Mpa(10000psi) | |||||||||||||||||||||||||||||||||||||||||
Tensile Strength | 650KN | 902KN | 1059KN | 2273KN | ||||||||||||||||||||||||||||||||||||||
Burst Pressure | 120.9Mpa | 194.6Mpa | 115Mpa | 142Mpa | ||||||||||||||||||||||||||||||||||||||
Collapse Pressure | 103.3Mpa | 140.2Mpa | 109Mpa | 116Mpa | ||||||||||||||||||||||||||||||||||||||
Torque Strength | 8.1kN.m | 12kN.m | 27kN.m | 45.5kN.m | ||||||||||||||||||||||||||||||||||||||
Working Temp. | -29oC~180oC | |||||||||||||||||||||||||||||||||||||||||
Service | H2S NACE MR0175(Above 175F) | |||||||||||||||||||||||||||||||||||||||||
Connection Thread | EUE/IF/CAS |