Free Standing Pipeline Water Dispenser With Filtration System

* Features:

1. Environmetal friendly, R134a refrigerant
2. Complete plastic ABS case
3. Good efficiency on both heating and cooling
4. With 4 stage built-in filtration system (11inch inline filters)
(PP sediment + Pre-activated carbon + Ultra filter + Post-activated carbon)

PP+GAC+UF+T33

* Technical Specification:

* Image for reference:

* With 4 stage combined filtration system:

PP+GAC+UF+T33

1st : PP sediment filter cartridge (PP)

2nd: Pre-activated carbon filter cartridge (GAC)

3rd: Ultra Filtration Membrane (UF)

4th: Post-activated Carbon Filter Cartridge (T33)

Remarks:
1) Different color options
2) 2 or 3 faucets options

Drinking Water Dispenser Use and maintenance

(1) The handling machine should be handled with care. When moving the water dispenser cooled by the compressor, it should be kept as upright as possible. If it is to be tilted, the tilt should not be greater than 45 degrees, and it must be stationary for a period of time after handling. Work.

(2) When using the water dispenser for the first time, clean the containers and pipelines of the water dispenser with clean water, then unscrew the drain valve, and then tighten the drain valve after draining the remaining water in the machine. After adding a large bottle of water, turn on the hot water faucet, plug in the power supply and turn on the heating switch after the water flows out, to avoid dry burning and prolong the life of the machine.

(3) If the water dispenser is out of use for a long time, please turn off the machine switch and unplug the power plug, then unscrew the drain valve, drain the remaining water in the machine, and then tighten the drain valve (please pay attention to the hot water scald during the draining process).

(4) It is best to disconnect the power supply when not in use at night, which can save energy and ensure safety when no one is using it.