Driver fatigue monitor with signal output 45km/h start-up speed
The LS-803 is a vehicle safety product that can accurately predict drowsiness in drivers and alert them at such a time. It's installation is instant and requires no calibration or setup. Simply place the camera on the dash facing the driver and it will detect the alertness of the person operating the vehicle, making sure their attention never wavers.
Alerts drivers upon detecting drowsiness
Advanced algorithms allow system to work in all conditions
Detects Driver Distraction
Built-in GPS allows users to set an alert based on speed
Simple installation - install in minutes
Power input and output
Input | 9-36V |
power consumption | 100mA in 12V car, and 60mA in 24V car |
I/O output | high resistance status under normal status, low voltage output when triggered |
Working Temprature: | 0-80℃ |
Working Humility: | 10%-90% |
Weigh: | 108g |
Demension: | 4.5*10.2cm |
1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm