Driver fatigue monitor with signal output 45km/h start-up speed
Power input and output
Input | 9-36V |
power consumption | 100mA in 12V car, and 60mA in 24V car |
I/O output | high resistance status under normal status, low voltage output when triggered |
Working Temprature: | 0-80℃ |
Working Humility: | 10%-90% |
Weigh: | 108g |
Demension: | 4.5*10.2cm |
I/O and RS232 output optional:
I/O output is only a high/low voltage output, you can get only the alarm signal,the connection is easy. The default setting is high resistance status under normal status, low voltage output when triggered.
RS232 output has alarm signal and picture output, thus you can get the driver's face picture in the center, it need to integrate to the GPS system via protocol.
1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm