Driver fatigue monitor with signal output 45km/h start-up speed

Description

Driver Fatigue Monitoring System has a pupil identification technology that can actually detect if a driver has fatigue. This system is a great solution for many companies that deal with long distance transport. One of the most dangerous things to do is to drive drunk, the second one is to drive while fatigued. The latter is a common practice for many truck drivers since they need to get their cargo to destination on time. Certain guidelines have been put in place in order to prevent drivers from driving fatigued but it is still not enough. This new system that Leisure has developed can assist in minimizing driver fatigue and thus preventing accidents and potentially saving lives.

Attention:

Non-authorized person, please do not open or repair the device.

Please do not operate the system when driving to avoid dangerous

Please handle carefully, do not drop or impact with hard objectives

Do not use chemicals or cleaning agents to clean the machine, it will damage the machine surfaces or rust the paint.

keep it away from water or moist place, device will be rusted or shortcut in those area.

Do not rip, bend or squeezed the wiring by heavy object, or it will be hot to fire.

Power input and output

1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm