Driver fatigue monitor with signal output 45km/h start-up speed

Power input and output

1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm

FAQ

Is it workable if I wear the sunglasses:
It depends on the sunglasses types, please kindly check the following detail information
A. Color film mirror sunglasses, can detect, but not so accurate.
B. Silvery film mirror sunglasses, can not detect completely
C. Non-reflection light sunglasses (including black or tea color sunglasses), detection is ok, can detect
D. Polarized light sunglasses, can detect, but not so accurate.

Can the system integrate with the GPS tracking system, so I can see the detail information on the center in office?
Yes, for our LS-803 professional version and MR688-RS232 version, you can integrate the MR688 with the GPS tracking system to output the fatigue/distraction signal, then the manager can know the detail driving situation of the driver.
We are the passenger transportation company, if we installed the LS-803 on our bus, the sounds alarming will affect our passengers. Is it any way to solve this problem?
Yes, we can solve the problem. For our LS-803 professional version, it has a vibration cushion for optional. You can buy our vibration cushion to connect with the LS-803 and turn off the LS-803 sounds alarming. When the driver fatigue, the LS-803 will not send out the sounds to affect the passengers, but it will shake to wake up the driver. Then we also can realize the function to avoid the accident.
Can it be used on the heavy machine, like the mining truck?

Yes, our LS-803 can be used on the mining truck. The LS-803 already installed on many big mining company truck, like the AngloAmerican, MMG and BHP Ect. We have professional experience in this area.

If we want to use our brand, is it ok?
Yes, we can accept the logo OEM, but the cost will be higher.
Can you do some customization on the product function?
Yes, we can customize according to the customer’s requirement. But the cost will be different.