Driver fatigue monitor with signal output 45km/h start-up speed
Leisure group has been working hard in new development and has successfully crafted a new innovative system that can monitor a driver and predict fatigue. The system uses a sophisticated identification system that locks in the driver’s eyes and analyzes for conditions that might indicate fatigue. The system has been praised for effectively finding a way to identify driver fatigue and quickly counter via visual and audio alerts.
Driver fatigue is one of the leading causes for accidents amongst long drives and its common with transportation as many drivers face long drives for hours with minimal rest. The new driver fatigue monitoring system also focuses on other factors including if drivers are using their cell phone to send text messages or making calls. Driver distraction is another factor which has been linked to many accidents which could have been prevented if the driver was paying attention to the road. Leisure ’s system is so sophisticated that it can even detect if the drivers are smoking inside the vehicle. All these bad driving habits can be instantly eliminated and prevented in the future.
Power input and output
Input | 9-36V |
power consumption | 100mA in 12V car, and 60mA in 24V car |
I/O output | high resistance status under normal status, low voltage output when triggered |
Working Temprature: | 0-80℃ |
Working Humility: | 10%-90% |
Weigh: | 108g |
Demension: | 4.5*10.2cm |
1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm