Plastic Path Maker Mold Resistance Performance , Paving Stone Molds Good Toughness

This kind of mould can make hexagon blocks with a hole, and it can be used as grass-planting block, slope protection block...

Product specification

How to use this Concrete Paver Mold to build the pathways:
Step 1:
Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.
Step 2:
Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area.
Step 3:
Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles.
Step 4:
Following the contours of the mold, smooth out the concrete, wiping away any excess.
Step 5:
Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you're creating a curving pathway.
Step 6:
After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle.

Agency

We are looking for the angent all over the world. And if you are my agent in your country, all of the business in your country we will send information to inform you who need these products, we will not do business in your country again, and every year, we will refund much money to you , it depends on the quantity of your orders in the year.

Delivery

It depends on the quantity and kinds of the order, normally we can finish a 20' feet container in 3 days. Shanghai port or Ningbo port is our first choose, they are nearby our factory, around an hour for driving.

Payment

Deposite 30-50 %, and full payment before delivery .