Simple tile adhesive dry mortar production line small dry mix plant

Description:

The horizontal ribbon mixer and twin shaft paddle mixer are suitable for the BH simple dry mortar plant. According to customer’s requirements, they can choose the horizontal ribbon mixer or twin shaft paddle mixer to equip their simple dry mortar plant.

The horizontal ribbon mixer is usually used in the 1-3T/H simple dry mortar plant, and the twin shaft paddle mixer is often used in the 4-5T/H improved dry mortar plant. The 1-3T/H simple dry mortar plant and 4-5T/H improved dry mortar plant, they can produce Putty powder, Tile adhesives,tile glue, Thin set coating, Masonry mortar, Plaster mortar, Screed mortar,Bonding mortar,AAC jointing mortar, dry sand mixture, Insulation mortar,Decoration mortar and so on.

Parameter:

BHR2000 Working principle:

The outer and inner screw ribbon blade driven by high speed rotating shaft,mixing the material in maximum,inner screw ribbon blade forced the material to sides,outer screw ribbon blade forced sides material to inward,mix the materials back and forth.In the same time,some material driven by screw ribbon do the radial motion,to form the convective mixing,so to achieve uniform mixing effect in relatively short time.

Features:

1. BHR series Horizontal ribbon mixer plant height is less than 3.2 meters, BHE series twin shaft paddle mixer plant height is less than 4.2 meters, both occupation area 15~ 20 square metres , ordinary houses can be use as factory production, this solve the problems of traditional dry mortar production line has to increase height of factory.

2. It achieve function of manual batching raw materials, automatic mixing, automatic filling and packing at 15-50kg/bag , under a small investment, and less labor.

3. It is one of the most simple and practical dry mortar production line.

Packaging photos:

Installation site: