Jaw crusher referred to as jaw, also known as jaw crusher, jaw crusher, there are simple pendulum jaw crusher and pendulum jaw crusher, mainly used for crushing compressive strength of not more than 320 mpa of various materials.Red star machine combined with domestic and foreign advanced technology research and development of jaw crusher, the use of deep cavity crushing, feeding and crushing efficiency is greatly improved, single machine energy saving 15%-30%, the system energy saving more than double, with advanced technology, long service life, reliable work, easy maintenance and other advantages
Model | Inlet Size(mm) | Feed size(mm) | Adjustable Range | Capacity (t/h) | Speed (r/min) | Power (kw) | Weight (t) |
PE-150*250 | 150*250 | 125 | 10-40 | 0.6--3 | 300 | 5.5 | 0.81 |
PE-250*400 | 250*400 | 210 | 20-60 | 3--13 | 300 | 15 | 2.8 |
PE-400*600 | 400*600 | 340 | 40-100 | 10--34 | 275 | 30 | 6.5 |
PE-500*750 | 500*750 | 425 | 50-100 | 20--52 | 275 | 55 | 10.3 |
PE-600*750 | 600*750 | 500 | 150-200 | 50--100 | 275 | 55 | 12 |
PE-600*900 | 600*900 | 500 | 65-160 | 30--75 | 250 | 55-75 | 15.5 |
PE-750*1060 | 750*1060 | 630 | 80-140 | 72--130 | 250 | 110 | 28 |
PE-800*1060 | 800*1060 | 640 | 100-200 | 85--143 | 250 | 110 | 30 |
PE-900*1060 | 900*1060 | 685 | 230-290 | 100--250 | 250 | 110 | 31 |
PE-900*1200 | 900*1200 | 750 | 95-165 | 87--164 | 200 | 110 | 50 |
PE-1000*1200 | 1000*1200 | 850 | 195-265 | 197--214 | 200 | 110 | 51 |
PE-1200*1500 | 1200*1500 | 1020 | 150-300 | 250--500 | 180 | 160 | 100.9 |
PEX-150*750 | 150*750 | 120 | 18-48 | 5--16 | 320 | 15 | 3.5 |
PEX-250*750 | 250*750 | 210 | 25-60 | 8--22 | 330 | 22 | 4.9 |
PEX-250*1000 | 250*1000 | 210 | 25-60 | 10--32 | 330 | 30-37 | 6.5 |
PEX-250*1200 | 250*1200 | 210 | 25-60 | 13--38 | 330 | 37 | 7.7 |
1. The machine frame is of reinforced welded structure, bearing block is of integral cast steel structure, eccentric shaft is made of high-strength forging parts, and the finite element software analysis and optimization make the equipment have higher impact resistance, low failure rate and high reliability;
2. Symmetrical ""V"" type crushing cavity design, large stroke and reasonable speed matching make crushing ratio bigger, capacity higher, and output particle size more uniform;
3. Large size bearings are used for higher carrying capacity. At the same time, the bearing chamber adopts effective labyrinth sealing method to greatly extend the service life of bearing;
4. Wedge adjustment device is adopted in the adjustment of discharge mouth, which makes the adjustment operation much easier, safer and faster.