Ceramic Powder Twin Shaft Paddle Mixer Non Gravity , Heavy Material Blender

Parameters of Ceramic Powder Mixer:

Descriptions of Heavy Material Blender:

Twin Shaft Agravic cylinder mixer cylinder engine is equipped with a biaxial folding cylinder, and the polymer shakes the material around the container and the perimeter. Fully applying the principles of convective coherence, the materials in the machines are constantly discarding and forming a layer of sediment, they may lose weight immediately at the same average velocity so that the best effect can be achieved, as well as the speed of violent change slows down the mixing time. to a very large extent. The machine is widely applied to infinite production line tools.

Installation and commissioning of equipment:

1. Horizontal installation, ensuring that the valve is opening, the handle and connecting rod is flexible.

2. After positioning of the reducer, tension the chain and install the safe cover.

3. Equipped with boot settings, which can connect the air source with the air cylinder.Use solenoid valve to control.The air pressure should guarantee 0.6Mpa. pressure according to the requirement of the air cylinder.

4. Install the control cabinet according to the requirement of the production line. Use AC contactor to control the circuit.

5. Confirm the rotating direction of the main axis,the chain wheel and the scutcheon arrow.Ensure that the chain aims the position of two main axis.The installation of the body and the transmission device refers to the outside view.Move the reducer to tension the chain. Move with hands and pay attention to the infall of the left and right main axis to make sure there is no friction.
6. Add engine oil for the reducer, chain and bearing.

7. The requirement of trial run: Maintain the empty machine operates 3 hours after energizing. Check the bearing block temperature of the two main axis. Make sure that no noise in the machine and the scutcheon arrow of the chain wheel point to the same direction.

FAQ:

1) How to get the most suitable machine and best price?
A: Please tell the material you want to working on.

2) How to working on it ?
A: What’s the MAX size of these material ?

3) Do you have the manual of machine ?
A: Yes,packing with machine together ship for you.

4) If we donot know how to use the machine, can you teach us?
A: Yes,we will ,if you come to China,we will offer you free training until you can use machine freely.And if you are busy ,we will have the special engineer to your country,but you need to bear some fee,like tickets and hotel and meal.

5) How about your after-sales service?
A: We offer you 24 hours service phone,skype or whatsapp.