Tower Type Tile Adhesive Machine Computer Control With Conveying Energy Saving

Product Introduction of Automatic Tile Adhesive Machine:

This semi automatic skim coat or tile grouting mortar dry mix plant is mainly composed of bucket elevator, twin shaft paddle mixer, holding tank, packaging machine, dust collector, control cabinet, air compressor. It can realize automatic feeding, automatic dust removal, automatic mixing, automatic filling and packing.

Applications of Dry Mortar Production Line:

Main Configurations of Dry Mortar Plant:

Production Line Operation Guidance:

1. Read the instructions carefully before starting up. Confirm that the direction of rotation of the motor such as hoist, mixer, pulse dust collector and valve mouth scale is correct. Check whether the switch button of the pneumatic valve of the mixer is misaligned, whether there is any foreign matter in the warehouse, and the production can be started without confirmation.
Note: If the motor of the valve port filler is rotated in the wrong direction, it will not be packed properly.
2. Start the first step. First turn on the main control switch of the control cabinet to turn on the computer system, preheat it for ten minutes, turn on the air compressor to raise the air pressure to the rated air pressure, and then add the ingredients ratio (recipe) of various raw materials. , (semi-automatic model) The first batch of materials is completed, the operator needs to open the metering conveyor button to make the raw materials enter the mixer through the bucket elevator to mix, and the mixing time of 2-3 minutes can reach the uniform requirement to start mixing. The machine discharge button is discharged to the finished product warehouse, and the operation is repeated. It must be noted that each batch is completely in the next step before the second step can be performed.

Note: If the raw material with a large specific gravity such as quartz sand is put into the inlet of the hoist, it should be gradual and cannot be slammed in order to avoid jamming the hoist.