Simple Stone Crushing Equipment Concrete Double Toggle Jaw Crusher PE 600 X 900

Product Descriptions of Jaw Crusher:

Jaw crusher is mainly used for crushing various kinds of ores and bulk materials. It is widely used in mining, metallurgy, building materials, highway, railway, water conservancy and chemical industries. The highest crushing material is 320MPa. In accordance with the size of the feed inlet to the large, medium and small type, feed inlet width greater than 600MM for large machines, feed inlet width of 300-600MM for medium-sized machine, feed inlet width for small machine. Jaw crusher simple structure, easy to manufacture, reliable, easy to use and maintenance.

Parameters of Rock Crushing Equipment:

Working Principles of Double Toggle Jaw Crusher:

The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw, and the stuff will be crushed in multiple ways. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of jaw crusher moves away from fixed jaw by the pulling force of rod and spring, the products after crushing will be discharged from the outlet of Jaw crusher.

Main Features of Rock Crushing Machine:

1) Simple structure in linear type ,easy in installation and maintation.

2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.

3) High pressure double crank to control the die opening and closing.

4) Running in a high automatization and intellectualization,no pollution

5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine.

In order to recommend a suitable design for you, please kindly tell me:

1. What is your raw material to be crushed, is it soft stone (like limestone, dolomite) or hard stone (like granite, basalt, river stone, etc)?

2. What is the maximum feed size of your raw material?

3. What are the output sizes you want?

Normally for road construction, it is 0-40 mm, while for aggregate, it is 0-20 mm.

4. What is the capacity you want? How many tons per hour?